Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial, you will learn how to remove and replace the front brake fluid reservoir on a TM Racing SMR 125. First, open the cap of the reservoir and empty all the fluid inside, perhaps using a syringe; then unscrew the fixing bracket screw using a 10 mm spanner. At this point, remove the clip and disconnect the reservoir from the hose. Finally, fit the new reservoir and connect it to the hose correctly; apply the reverse procedure for reassembling the reservoir!

Updated on 18 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Smr 125 In this video tutorial, we will see how to dismantle and replace the brake and clutch levers on a TM Racing SMR 125 motorcycle. First, remove the clu…
Smr 125 In this video, you will see how to make some aesthetic and functional modifications on a Tm Racing SMR 125 motorcycle, following the instructions pro…
Smr 125 In this video, you will see how to remove the clutch lever from a TM Racing SMR 125 in simple steps. First, remove the gasket around the lever; then,…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos