Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Ducati Panigale V2

Model: Ducati Panigale V2
Part: Brake pads

Video tutorial

Today, we will guide you through how to remove and replace the front brake pads on the Ducati Panigale V2 motorcycle in simple and quick steps. First, place your motorcycle on a stand and start by unscrewing the central pin of the brake pad holder found on the caliper, using a Torx spanner; then remove the old brake pads, as shown in the video.

At this point, install the new pads, pressing on the caliper piston to retract it; perform the same operation to replace the other brake pads!


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How do you replace the front brake pads of the Ducati Panigale V2?
How do you replace the front brake pads of the Ducati Panigale V2?
Panigale V2 It will be possible to replace the front brake pads of the Ducati Panigale V2 by loosening the screws that secure the brake caliper to the correspond…
How to Replace the Brake Pads on the Ducati Panigale V2?
How to Replace the Brake Pads on the Ducati Panigale V2?
Panigale V2 Replacing the brake pads on the Ducati Panigale V2 is done in the same way for both the rear and front wheels. You need to loosen the bolts that secu…
How to Change the Engine Oil on a Ducati Panigale V2
How to Change the Engine Oil on a Ducati Panigale V2
Panigale V2 In this tutorial, we will perform the routine maintenance oil change on the 2021 Ducati Panigale V2 by following these simple steps. First, remove th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Engine Oil of a Ducati Hypermotard?

To change the engine oil of a Ducati Hypermotard, follow these simple but important steps. First, position the bike on a central or side stand to ensure stability. Make sure the engine is warm, not hot, to facilitate the flow of oil. Locate the oil drain plug, usually found on the underside of the engine. Place a suitable container under the drain plug to collect the used oil. Unscrew the drain plug and allow the used oil to drain completely into the container. Ensure you remove all the old oil before proceeding. Once all the oil has drained, reinstall and tighten the drain plug securely. Next, fill the engine with new engine oil of the specification recommended by the manufacturer. Use a funnel to avoid oil spills. Finally, check the oil level with the dipstick and add oil if necessary to bring it to the correct level. Make sure to dispose of the used oil properly at an authorised recycling centre.

Watch the video!


by ScegliAuto

More videos