Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wheel and Brake Pads of the Ducati Panigale V4

Model: Ducati Panigale V4r
Part: Wheel

Video tutorial

This guide provides the main instructions for removing and replacing the front wheel and brake pads of the Ducati Panigale V4 motorcycle. First, lift the front wheel off the ground using a paddock stand.

Then, loosen the two bolts on the fork using an Allen key, as shown in the video. Next, remove the front brake calipers by unscrewing their bolts.

Slide out the front wheel by removing the central axle, then replace the brake pads before reassembling the front wheel!


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Cover on a Ducati Panigale V4
How to Replace the Clutch Cover on a Ducati Panigale V4
Panigale V4r In this video tutorial, you will see how to disassemble and replace the clutch cover on a Ducati Panigale V4 motorcycle. First, unscrew all the faste…
How to Change the Engine Oil in the Ducati Panigale V4?
How to Change the Engine Oil in the Ducati Panigale V4?
Panigale V4r This tutorial shows how to change the engine oil in the Ducati Panigale V4, a very simple and quick operation. First, ensure the engine is sufficient…
How to Change the Engine Oil and Oil Filter on a Ducati Panigale V4
How to Change the Engine Oil and Oil Filter on a Ducati Panigale V4
Panigale V4r In this video, you will see the steps to change the engine oil and oil filter while performing routine maintenance on a 2020 Ducati Panigale V4. Firs…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Engine Oil on the Kymco Xciting 250 R?

To replace the engine oil on the Kymco Xciting 250 R, first remove the oil drain plug located at the central bottom of the vehicle. This will allow you to collect all the used oil in a suitably positioned container. Next to the drain plug, you will also find the oil filter, which can be removed from its housing and replaced with a new spare part. After the replacement, top up the oil by pouring the new oil through the breather located on the left side of the bike.

Watch the video!


by ScegliAuto

More videos