Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on the Ducati Panigale V2

Model: Ducati Panigale V2
Part: Checks and maintenance

Video tutorial

Today, learn the steps to perform the routine maintenance service by changing the engine oil and oil filter on the Ducati Panigale V2 motorcycle. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, remove the screws from the oil filter cover, taking out and replacing the cartridge with a new one, as shown in the video.

At this point, unscrew the filler cap and top up with new engine oil, the specifications of which are indicated in the owner's manual!


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to change the engine oil on the Ducati Panigale V2?
How to change the engine oil on the Ducati Panigale V2?
Panigale V2 To change the engine oil on the Ducati Panigale V2, you need to loosen the screws that secure the side protection plates at the bottom of the bike: b…
How to Change the Engine Oil on a Ducati Panigale V2?
How to Change the Engine Oil on a Ducati Panigale V2?
Panigale V2 To change the engine oil on a Ducati Panigale V2, unscrew the drain plug located at the central lower part of the bike: once the plug is unscrewed, a…
How to Change the Engine Oil on a Ducati Panigale V2?
How to Change the Engine Oil on a Ducati Panigale V2?
Panigale V2 This tutorial explains how to change the engine oil on a Ducati Panigale V2, a very simple and quick task. First, ensure the engine is sufficiently c…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Engine Oil of a Ducati Hypermotard?

To change the engine oil of a Ducati Hypermotard, follow these simple but important steps. First, position the bike on a central or side stand to ensure stability. Make sure the engine is warm, not hot, to facilitate the flow of oil. Locate the oil drain plug, usually found on the underside of the engine. Place a suitable container under the drain plug to collect the used oil. Unscrew the drain plug and allow the used oil to drain completely into the container. Ensure you remove all the old oil before proceeding. Once all the oil has drained, reinstall and tighten the drain plug securely. Next, fill the engine with new engine oil of the specification recommended by the manufacturer. Use a funnel to avoid oil spills. Finally, check the oil level with the dipstick and add oil if necessary to bring it to the correct level. Make sure to dispose of the used oil properly at an authorised recycling centre.

Watch the video!


by ScegliAuto

More videos