Do it yourself
Frequently asked questions about cars and motorcycles
To change the motor oil of a Ducati Panigale V4, start by placing the motorcycle on a central or side stand to ensure stability. Start the engine and let it run for a few minutes to heat up the oil and make it more fluid. Turn off the engine and locate the oil drain plug, usually located on the bottom side of the engine. Use an appropriate wrench to unscrew the drain plug and let the used oil drain completely into a collection pan. Once the oil is completely drained, securely tighten the drain plug. Next, locate the oil fill plug on the top side of the engine. Remove the plug and use a funnel to slowly pour the recommended amount of new oil for your motorcycle model. Make sure not to exceed the maximum level indicated on the oil dipstick. Finally, replace the fill plug and ensure it is tightly secured. Check for any oil leaks and start the engine for a few minutes to evenly distribute the new oil in the engine. Once completed, turn off the engine and check the oil level again to ensure it is correct.

Posted on 26 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Panigale V4r This tutorial shows how to change the engine oil in the Ducati Panigale V4, a very simple and quick operation. First, ensure the engine is sufficient…
Panigale V4r In this tutorial, see how to change the engine oil in the Ducati Panigale V4, a very simple and quick operation to perform every 12 months. First, en…
Panigale V4r In this video, you will see the steps to change the engine oil and oil filter while performing routine maintenance on a 2020 Ducati Panigale V4. Firs…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos