|
Do it yourself
| |||
| ||||
|
Model: Enfield Classic 350
In this guide, we will discover the main steps to disassemble and replace the clutch discs on the Royal Enfield Classic 350. First, place the bike on its centre stand and begin draining the engine oil by unscrewing the drain bolt located underneath. Then, unscrew all the screws on the sides of the clutch cover using a 10 mm socket spanner. At this point, unscrew the screws of the metal disc, then remove the subsequent cork discs; simply replace the clutch, following the video tutorial until the end!
Updated on 7 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Classic 350
Today, we will discover the instructions that will allow us to remove and replace the clutch assembly of the Royal Enfield Classic 350 motorcycle. Fi…
Classic 350
You can replace the clutch on a Royal Enfield Classic 350 by loosening the screws that secure the cover on the right side of the bike, in its lower c…
Classic 350
The clutch of the Royal Enfield Classic 350 can be replaced by loosening the screws that fix the clutch cover on the right side, in the central lower…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.218
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
