Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses on a Royal Enfield Classic 350

Model: Enfield Classic 350
Part: Fuse box

Video tutorial

In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is completely off for safety reasons, then position the stand correctly and move to the left side of your Royal Enfield Classic 350. At this point, locate the small compartment at the rear and open it with the appropriate key. Finally, find the fuses you were looking for, and you are done.

It is advisable to disconnect the battery when working on them.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorber on the Royal Enfield Classic 350?
How to Replace the Rear Shock Absorber on the Royal Enfield Classic 350?
Classic 350 To replace the rear shock absorber on the Royal Enfield Classic 350, loosen the bolts securing the components in their housing on both sides of the r…
How to Replace the Silencer on a Royal Enfield Classic 350
How to Replace the Silencer on a Royal Enfield Classic 350
Classic 350 In this guide, we will outline the necessary instructions to dismantle and replace the silencer on the Royal Enfield Classic 350 motorcycle. First, p…
How to Replace the Headlamp Bulb on the Royal Enfield Classic 350
How to Replace the Headlamp Bulb on the Royal Enfield Classic 350
Classic 350 To replace the headlamp bulb on the Royal Enfield Classic 350, loosen the screws around the perimeter of the headlamp so that it can be released from…

How to Change the Engine Oil in the Triumph Tiger 800

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 800, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then place a container underneath it. Locate the drain hole bolt and unscrew it using an 8 mm hex key. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos