Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the headlamp bulb on the Royal Enfield Classic 350, loosen the screws around the perimeter of the headlamp so that it can be released from its housing; this will allow you to disconnect the connector at the rear of the light unit, enabling you to remove the bulb inside. Once the old bulb has been removed, insert the new one, ensuring it is connected to the connector; finally, reposition the headlamp and secure it with the appropriate screws.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Headlamp Bulb on the Royal Enfield Classic 350
Replace the Headlamp Bulb on the Royal Enfield Classic 350
Classic 350 In this video tutorial, you will learn how to remove and replace the headlamp bulb on the Royal Enfield Classic 350 motorcycle. First, place your mot…
How to Replace the Front Indicator Bulb on a Royal Enfield Classic 350?
How to Replace the Front Indicator Bulb on a Royal Enfield Classic 350?
Classic 350 To replace the front indicator bulb on a Royal Enfield Classic 350, loosen the screw located at the rear of the corresponding headlamp. Once this scr…
How to Replace the Headlamp Bulb on the Royal Enfield Classic 350?
How to Replace the Headlamp Bulb on the Royal Enfield Classic 350?
Classic 350 .. In this tutorial, you will learn how to replace the headlamp bulb on the Royal Enfield Classic 350, a very simple and quick operation... …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos