Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to replace the headlamp bulb on the Royal Enfield Classic 350, a very simple and quick operation. First, ensure that the key is not inserted. Next, locate the screw on the upper part of the headlamp and unscrew it using a standard cross-head screwdriver. Then, grasp the headlamp, pull it towards you, and separate it from the base. At this point, disconnect the power connector, remove the rubber cap, replace the old bulb, and reassemble everything by following the reverse procedure.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Headlamp Bulb on the Royal Enfield Classic 350
Replace the Headlamp Bulb on the Royal Enfield Classic 350
Classic 350 In this video tutorial, you will learn how to remove and replace the headlamp bulb on the Royal Enfield Classic 350 motorcycle. First, place your mot…
How to replace the front headlight on the Royal Enfield Classic 350?
How to replace the front headlight on the Royal Enfield Classic 350?
Classic 350 In this tutorial we can see how to replace the front headlight on the Royal Enfield Classic 350, an extremely simple and quick operation. First of al…
How to Replace the Rear Headlight Bulb on the Royal Enfield Classic 350
How to Replace the Rear Headlight Bulb on the Royal Enfield Classic 350
Classic 350 This guide provides instructions for removing and replacing the rear headlight bulb on the Royal Enfield Classic 350. First, place the bike on its ce…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos