Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will discover the instructions that will allow us to perform the ordinary maintenance service, replacing the engine oil and oil filter, of the Kawasaki Versys 650 motorcycle. First, we put the motorcycle on the central stand and start to unscrew the oil drain bolt found under the engine, letting it drain into a container for about ten minutes; then we unscrew the oil filter cartridge and replace it with the new one, screwing it in by hand and then tightening it gently. At this point, we unscrew the filler cap and top up with the new oil!

Posted on 27 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replace the Engine Oil and Oil Filter on a Kawasaki Versys 650
Replace the Engine Oil and Oil Filter on a Kawasaki Versys 650
Versys 650 Today, in this guide, we will discover the procedure necessary for performing routine maintenance by replacing the engine oil and oil filter on a Kaw…
How to replace the engine oil in the Kawasaki Versys 650?
How to replace the engine oil in the Kawasaki Versys 650?
Versys 650 In this tutorial we can see how to replace the engine oil in the Kawasaki Versys 650, an extremely simple and quick operation. First of all, we wait …
How to replace the engine oil in the Kawasaki Versys 650?
How to replace the engine oil in the Kawasaki Versys 650?
Versys 650 In this tutorial we can see how to replace the motor oil in the Kawasaki Versys 650, a very simple and quick operation. First of all, make sure that …

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos