Do it yourself
| ||||
|
Model: Enfield Classic 350
In order to replace the front turn signal bulb of the Royal Enfield Classic 350, you need to loosen the screw located in the back of the corresponding headlight: once this screw has been loosened, you can proceed to remove the headlight lens, so that you can remove the bulb from its socket. Once the old bulb has been removed, you can connect the new one and insert it into the headlight: you can now reposition the lens and then secure it with the screw in the back.
Posted on 4 April 2024 by ScegliAuto
|
How to replace the battery on the Honda X-ADV 750 2018This guide will explain the battery replacement procedure for the Honda X-ADV 750 from 2018 onwards. Here are the steps that need to be taken: 1. Move the wheel located on the handlebar on the left, towards "Seat"; 2. Lift the saddle and remove the various gaskets and plastic supports below; 3. With a plastic tool and a wrench, remove the remaining screws and pins by applying a slight pressure during the lever, without forcing particularly; 4. Unscrew the last screws of the positive and negative and the relative strap that keeps the battery tied to its seat; 5. Remove the battery to be replaced; 6. Check that the new spare battery has the same voltage and amperage to avoid electrical problems; 7. Reassemble everything by following the steps described in reverse. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |