Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. : 600e

Fiat 600e - Video guides

Fiat 600e (2023-2026 / MK 1)
How to Reset the Service Light of the Fiat 600 2025
To discover how to manually reset the service light on your new Fiat 600 2025, carefully read the following guide and apply the described steps. First, ensure …Read all…
Posted on 5 June 2026 by ScegliAuto
Fiat 600e (2023-2026 / MK 1)
How do you reset the tire warning light on a Fiat 600?
The vehicle shown in the attached video is indeed the Fiat 600 mentioned in the subject, and we will discover the correct DIY method to reset the tire warning …Read all…
Posted on 27 December 2025 by ScegliAuto
Fiat 600e (2023-2026 / MK 1)
How to replace the battery of the remote control for the Fiat 600e?
In this tutorial, we will see how to replace the battery of the Fiat 600e remote control, a very simple and quick operation. To do this, we will need a small …Read all…
Posted on 24 December 2025 by ScegliAuto
Fiat 600e (2023-2026 / MK 1)
How do you reset the tire pressure warning light in Fiat cars?
The tire pressure sensor is present in all recently built cars, including those branded Fiat. Speaking of the latter, let's see in the latest generation Fiat …Read all…
Posted on 7 January 2025 by ScegliAuto
Fiat 600e (2023-2026 / MK 1)
How to reset the "Service" light on a Fiat 600?
To reset the "Service" light on a Fiat 600, turn on the instrument panel without starting the engine. Locate the button located on the turn signal stalk, …Read all…
Posted on 2 January 2025 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos