Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Fiat 600?

Model: Fiat 600e MK 1 - Years 2023-2026
Part: Service warning light

To reset the "Service" light on a Fiat 600, turn on the instrument panel without starting the engine. Locate the button located on the turn signal stalk, usually used to access the vehicle settings menu. Press the button and hold it for a few seconds until the maintenance menu appears on the display. Once in the menu, use the same button to scroll through the available options and select the option corresponding to maintenance or oil change reset. Hold the button down again to confirm the operation. After a few moments, the system will confirm the reset with a message or by turning off the "Service" light. Turn off and on the instrument panel to verify that the light has been successfully reset. If the problem persists, check the vehicle manual or contact an authorized workshop for further checks.

Posted on 2 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light of the Fiat 600 2025
How to Reset the Service Light of the Fiat 600 2025
Fiat 600e (2023-2026 / MK 1) To discover how to manually reset the service light on your new Fiat 600 2025, carefully read the following guide and apply the described steps. Firs…
How do you reset the tire warning light on a Fiat 600?
How do you reset the tire warning light on a Fiat 600?
Fiat 600e (2023-2026 / MK 1) The vehicle shown in the attached video is indeed the Fiat 600 mentioned in the subject, and we will discover the correct DIY method to reset the tir…
How do you reset the tire pressure warning light in Fiat cars?
How do you reset the tire pressure warning light in Fiat cars?
Fiat 600e (2023-2026 / MK 1) The tire pressure sensor is present in all recently built cars, including those branded Fiat. Speaking of the latter, let's see in the latest generat…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos