Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlamp Bulb on a Fiat Punto

Model: Fiat Punto Grandepunto , Punto EVO, MK 3, 199 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
This video is currently unavailable

To carry out this operation, only a few steps are necessary, which can be completed in just a few minutes. First, disconnect and lift the bonnet to protect the more delicate circuits of your vehicle.

Now you can easily access the rear of the headlamp, remove the protective cover, and disconnect the connector that powers the individual bulbs. Extract the bulbs from their position to install the new ones, and you're done!


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) If you own a 2005 Fiat Punto and want to replace the front headlamp bulb, read this guide and follow the steps outlined. First, lift the bonnet and r…
Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
Fiat Punto (1993-1999 / 176, MK 1) How to replace the front headlamp bulbs on a Fiat Punto? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos