Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Headlight bulb

To carry out this simple operation, simply unclip the bonnet from the designated lever to lift it and secure it with the appropriate rod. Next, locate the rear part of the headlamp where the replacement will take place and remove the protective cover, allowing you to disconnect the connector that powers the individual bulbs. Extract the bulb and install the new one, taking care not to touch it directly with your fingers. Then retrace the steps described to reassemble the various components removed.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Fiat Punto?
How to Replace the Front Headlight Bulb on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front headlight bulb on a Fiat Punto, open the bonnet to access the engine bay. You will need to remove the protective cover from the …
How to Replace the Front Headlamp Bulb on a Fiat Punto
How to Replace the Front Headlamp Bulb on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front headlamp bulb on a Fiat Punto, access the rear of the headlamp by opening the bonnet and entering the engine compartment. Here, …
How to Replace the Front Headlamp Bulbs on a Fiat Punto
How to Replace the Front Headlamp Bulbs on a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) How to replace the front headlamp bulbs on a Fiat Punto? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos