Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coloured Plastic on the Wing Mirror of a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Punto EVO, Grandepunto - Years 2005-2018
Part: Side mirror

How do you replace the coloured plastic on the exterior wing mirror of a Fiat Grande Punto? Follow this guide. Using a plastic or rubber lever, pry between the perimeter of the mirror frame and the cover. Carefully lever until the cover detaches from the mirror; this is a delicate operation as the mirror's plastic may break. Once the cover is removed, you can replace it or carry out maintenance on it. Use the same procedure to refit the mirror cover.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the mirror cap on the Fiat Grande Punto
Replacement of the mirror cap on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) In this video we will see how to replace the mirror cap and the entire external rearview mirror on the Fiat Grande Punto, but also on the Punto Evo. …
How to replace the key shell of the Fiat Grande Punto?
How to replace the key shell of the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) In order to replace the key shell of the Fiat Grande Punto you have to lift the ignition key, so that you can loosen the screw that is inside its hou…
Replace the external rear view mirror on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) In this video tutorial we will see how to disassemble and replace the wing mirror of the Fiat Grande Punto, but also of the Punto Evo, by following t…

Removing VW Passat Interior Lights

Below is how to replace the bulbs in all the interior lights of this vehicle. For the lights on the roof, use a flathead screwdriver to gently lever at the side where you will release the retaining clip, pull it out, and after replacing the bulb, press it back into place. For the light above the front seats, lever (with the flathead screwdriver) directly on the transparent plastic to detach it from the retaining tabs (replace the bulbs and press it back into place). For the rear light and number plate lights, perform the same operation: lever to release the tab, replace, and press back into place.

Watch the video!


by ScegliAuto

More videos