Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wing of a Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Accessory kit

See other generations:
Video tutorial

First, remove the wheel where the replacement will occur, then lift the vehicle. This will provide easy access to the clips and bolts securing the wing from the inside.

Next, remove the bolts located on the underside of the body and any remaining screws. You can now comfortably extract the entire inner part of the wing.

To remove the bumper, follow the instructions in the video. To reassemble the wing, simply retrace the steps in reverse.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wing of a Renault Clio
How to Remove the Front Wing of a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) This guide outlines the steps to remove and replace the front wing of a Renault Clio, following the instructions below. First, open the bonnet of you…
Replacing the Diesel Filter on the Renault Clio 3
Replacing the Diesel Filter on the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The diesel filter for the 1.5 dCi engine of the Renault Clio 3 is a special filter: it is a single plastic block that contains the filter and is not …
How to Remove the Front Headlamp of a Renault Clio?
How to Remove the Front Headlamp of a Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) To remove the front headlamp of a Renault Clio, start by loosening the screws that secure the inner wheel arch lining, allowing it to be removed. Onc…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos