Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wing of a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005

This guide outlines the steps to remove and replace the front wing of a Renault Clio, following the instructions below. First, open the bonnet of your car and start removing the screws and clips found at the top of the wing; remove the additional clips located under the wing, as shown in the video. At this point, unscrew the bolts of the front bumper to detach and remove it; finally, completely remove the front wing and replace it with a new one, then proceed with painting the component!

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wing of a Renault Clio
How to Replace the Front Wing of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) First, remove the wheel where the replacement will occur, then lift the vehicle. This will provide easy access to the clips and bolts securing the wi…
Replacing Headlights on Renault Clio
Replacing Headlights on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Replacing the front headlight on a Renault Clio? Let’s look at how to remove the headlight. To remove the front headlight, you need to take off the f…
How to Remove the Front Bumper on a Renault Clio
How to Remove the Front Bumper on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos