Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

How do you replace a rear headlight bulb on a Ford Focus? Let's see how to do it in this video. This operation is very simple to carry out. Open the boot and remove the plastic cover from the side trim. Unscrew the retaining screws of the lamp unit, then pull it out by hand from the car's bodywork. Disconnect the power connectors, taking care not to damage them. Once the rear light is removed, replace the damaged bulbs. After completing this operation, reassemble everything in reverse order. Finally, check that the lights are functioning correctly.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb on the Ford Focus?
How to replace the front headlight bulb on the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the front headlight bulb on the Ford Focus, open the bonnet and loosen the socket screw that secures the headlight to its upper support. T…
How to replace the front headlight bulb of the Ford Focus 2
How to replace the front headlight bulb of the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) In this new guide dedicated to all of you who own a second series Ford Focus, we will discover how to correctly replace the headlight bulb. First of …
Removing the Headlight on Ford Focus
Removing the Headlight on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to remove the front headlight from the Ford Focus? The headlight is secured with retaining screws, so let’s see how to do it. Unscrew the retain…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos