Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace a Ford Focus 3 headlight bulb

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Headlight bulb
Operation: How to replace a Ford Focus 3 headlight bulb

If you own a Ford Focus third series (year 2011-2018) and you want to find out how to replace the headlight bulb independently and safely, then you just need to put the following steps into practice. First turn off the car and lift the front hood. Once the safety arm is in place, unscrew the two screws located at the top and bottom of the headlight in question. Once this is done, remove the cap located in the rear part of the headlight and proceed with the replacement of the faulty bulb. Finally, put the headlight back together and you're done.


Posted on 2 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 1998-2004 - How to replace the headlight bulb on a Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos