Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, follow the instructions to replace the front headlamp bulb on a Ford Focus MK2. First, open and lift the bonnet of your car and unscrew the fixing screws of the front lamp to remove it; then remove the protective caps from the bulbs and disconnect the electrical connectors.

At this point, release the metal clip to remove the bulb; replace it with a new one of the correct type (in this case, type H1), and reassemble everything by following the reverse procedure!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb in Your Ford Focus Mk2
How to Replace the Front Headlamp Bulb in Your Ford Focus Mk2
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide for Ford Focus Mk2 owners, you will learn how to correctly replace the front headlamp bulb. First, lift the bonnet and use a small hex …
How to replace the front headlight bulb on the Ford Focus?
How to replace the front headlight bulb on the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the front headlight bulb on the Ford Focus, open the bonnet and loosen the socket screw that secures the headlight to its upper support. T…
Replacement of the dipped beam bulb of the Ford Focus
Replacement of the dipped beam bulb of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This short and simple guide will show us how to disassemble and replace the low beam bulb of the front headlight of the Ford Focus. First, we open th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos