Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the dipped beam bulb of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Headlight bulb

This short and simple guide will show us how to disassemble and replace the low beam bulb of the front headlight of the Ford Focus. First, we open the hood of the car and start removing the front headlight by unscrewing the fixing screws found on the top part of the headlight; then we disconnect the electrical connector of the bulbs, as shown in the video. At this point, we remove the plastic protective cap and then the low beam bulb, replacing it with the new one (of the correct type and with the same attachment); finally, we reassemble the front headlight, making the electrical connection!

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the low beam bulb on Ford Focus
Replacement of the low beam bulb on Ford Focus
Ford Focus (2011-2018 / MK 3) To replace the dipped beam bulb of our Ford Focus, we first need to open the hood, then unscrew the two screws holding the headlight in place to remo…
Replacing Dipped Beam Bulbs on a Ford Focus 3
Replacing Dipped Beam Bulbs on a Ford Focus 3
Ford Focus (2011-2018 / MK 3) This short video guide shows the entire procedure necessary to replace the dipped beam bulbs on our third-generation Ford Focus, produced from 2011 t…
What is the Dipped Beam Relay in a Ford Focus?
What is the Dipped Beam Relay in a Ford Focus?
Ford Focus (1998-2004 / MK 1) If the dipped beam headlights on your Ford Focus have suddenly stopped working, and both the bulbs and fuses are in good condition, you can check the…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos