Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the low beam bulbs in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

In this tutorial we can see how to replace the low beam bulbs in the Ford Focus, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the hood, locate the two screws on the upper edge of the headlight in question and unscrew them using a Torx T30 key. Then grab the headlight, pull it towards you and separate it from the bodywork. At this point we can open the circular cap indicated, disconnect the connector, replace the faulty bulb and reassemble everything following the reverse procedure.

Posted on 10 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulbs of the Ford Focus
Replacement of the front headlight bulbs of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's guide will allow us to disassemble and replace the bulbs of the front headlight of the Ford Focus. First, we open the car's hood and start un…
Replacement of the dipped beam bulb of the Ford Focus
Replacement of the dipped beam bulb of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This short and simple guide will show us how to disassemble and replace the low beam bulb of the front headlight of the Ford Focus. First, we open th…
Replacement of the low beam bulb of a Ford Focus
Replacement of the low beam bulb of a Ford Focus
Ford Focus (2011-2018 / MK 3) We can see thanks to this very useful tutorial today how to replace the low beam bulb on a Ford Focus, third generation model (2011-2018). Let's star…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos