Do it yourself
| ||||
|
Ford Focus - Video tutorial
Model: Ford Focus
MK 3
- Years 2011-2018 To replace the dipped beam bulb of our Ford Focus, we first need to open the hood, then unscrew the two screws holding the headlight in place to remove it. After that, we disconnect the plastic cover behind the bulb and the connector of the dipped beam as shown in the video, then we rotate the bulb a quarter turn counterclockwise and finally remove it from its socket. Now, we install a new dipped beam bulb simply by following the reverse procedure. The bulb needed for this vehicle model is the H7.
Posted on 22 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |