Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulbs of the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Headlight bulb

Today's guide will allow us to disassemble and replace the bulbs of the front headlight of the Ford Focus. First, we open the car's hood and start unscrewing the fastening screws that we find on the upper part of the headlight, disconnecting the electrical connector of the lights to remove it; at this point we remove the plastic protective cap of the lights to access the low beam bulb, releasing the metal clip. Now it will be possible to replace the low beam bulb with the new one, having the same attachment, also replacing the other lights of the headlight if necessary!

Posted on 13 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace Headlamp Bulbs on Ford Focus
Replace Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Remove the front headlamp from the Ford Focus to replace the bulbs inside. Lift the bonnet that covers the engine and locate the securing screws for …
Replacing Front Headlamp Bulbs on Ford Focus
Replacing Front Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the front headlamp bulbs on your Ford Focus blown? Let's replace them. Open the bonnet by pulling the lever located at the bottom right of the da…
Removing Front Bumper on Ford Focus
Removing Front Bumper on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, you will learn how to remove the front bumper from a second-generation Ford Focus. First, detach the front fog light grilles using a lever. Ne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos