Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the low beam bulb of a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Headlight bulb

We can see thanks to this very useful tutorial today how to replace the low beam bulb on a Ford Focus, third generation model (2011-2018). Let's start the operation by opening the car's hood, then we unscrew the two screws that hold the headlight in place as shown in the video and then extract it from its seat. After that, we remove the rubber dust cover of the low beam bulb and remove its connector, finally we extract the old bulb and replace it with a new one and then reassemble everything following the reverse procedure.

Posted on 31 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Ford Focus
How to replace the front headlight bulb of the Ford Focus
Ford Focus (1998-2004 / MK 1) In a few simple steps, we will see the process of disassembling and replacing the headlight bulb of the Ford Focus. First, we open the hood of the ca…
Replacement of the dipped beam bulb of the Ford Focus
Replacement of the dipped beam bulb of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This short and simple guide will show us how to disassemble and replace the low beam bulb of the front headlight of the Ford Focus. First, we open th…
Replacement of the low beam bulb on Ford Focus
Replacement of the low beam bulb on Ford Focus
Ford Focus (2011-2018 / MK 3) To replace the dipped beam bulb of our Ford Focus, we first need to open the hood, then unscrew the two screws holding the headlight in place to remo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos