Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Headlamp Bulb on Fiat Punto 2

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

Today, you will see the instructions to remove and replace the front headlamp bulb on a second series Fiat Punto. First, open the bonnet of your car and remove the intake hose and the rubber protection cap to access the dipped beam bulb.

Then, disconnect the electrical connector and unclip the metal spring to extract the bulb, as illustrated in the video. At this point, replace it with a new one of the correct type (in this case, H1) and reassemble everything by reversing the disassembly procedure!


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) If you own a 2005 Fiat Punto and want to replace the front headlamp bulb, read this guide and follow the steps outlined. First, lift the bonnet and r…
Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…
Fiat Punto (1999-2011 / MK 2, 188) To replace the front fog light bulb, first lift the car using a jack and then remove the wheel corresponding to the bulb you want to replace. Once th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos