Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light on Fiat Uno

Model: Fiat Uno MK 1 - Years 1983-1995
Part: Tail light

In this video tutorial, you will learn how to remove the rear light on a Fiat Uno by following these simple steps. First, open the boot lid and disconnect the electrical connector of the bulbs by pressing on the tab; then unclip the light from the rear and pull it out from the outside, as illustrated in the video. At this point, you will be able to access the bulbs of the light by separating the bulb holder from the lens to replace them; reassemble everything by applying the reverse procedure of disassembly, following the video to the end!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear shock absorber of the Fiat Uno?
How do you replace the rear shock absorber of the Fiat Uno?
Fiat Uno (1983-1995 / MK 1) To replace the rear shock absorber of the Fiat Uno, you will need to lift the car with a jack or a lift. Once the car is raised, you can loosen the b…
Removing the Fuel Pump from a Fiat Uno Fire
Removing the Fuel Pump from a Fiat Uno Fire
Fiat Uno (1983-1995 / MK 1) In today's guide video, see how to remove and replace the fuel pump of a Fiat Uno Fire, following these main instructions. First, access the rear of …
Where are the Fuses on the Fiat Uno?
Where are the Fuses on the Fiat Uno?
Fiat Uno (2010-2021 / Nuovouno , Type327) The fuses on the Fiat Uno are all contained within the dedicated fuse box located in the vehicle: this is unique and is found in the engine compartme…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos