Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Removing the front bumper

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Front bumper
Operation: Removing the front bumper

The guide shows us how to remove the front bumper you need to unscrew two screws with a torx, a t27, under the bumper, near the wheel, there are two more screws, those must also be unscrewed with the same type of key. In addition, the three Phillips screws on the side of the bumper must also be unscrewed. There is also a hex screw to unscrew in order to detach the bumper. Before removing the bumper there are two other last screws that need to be accessed from underneath to be unscrewed. Something soft should be placed underneath so that when detached from the sides and disassembled, the bumper falls on top of it. To reassemble it, simply do the reverse process.


Posted on 21 July 2023 by ScegliAuto



Removing the front bumper Fiat Punto Evo
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Remove the front bumper of the Fiat Punto Evo? Let's see how the damaged front bumper is removed. We lift the car on a jack to remove the screws unde
How to mount the front bumper on Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) How to mount the front bumper on Fiat Grande Punto? Let's see how to proceed, an operation not too complex if you proceed in order. First of all we t
How to replace the front bumper of a Fiat Punto first series
Fiat Punto (1993-1999 / 176, MK 1) How to replace the front bumper on a first series Fiat Punto? Let's see together how to proceed with the various steps: with a screwdriver or cordles

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos