Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the Front Bumper Mounting Pins on a Fiat Punto 176

Model: Fiat Punto MK 1, 176 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Body

See other generations:
Video tutorial

Watch this video to see where the mounting points for the front bumper are on a Fiat Punto 176: at the lowest part of the lower beam, there are four visible points where the bolts should be inserted. On the sides, attached to the wing, you can find two points on each side, and underneath (both right and left) there is a bracket that goes down where a third bolt should be positioned; in total, there are ten pins that secure the bumper.

You will also see a view of the bumper itself, ready to be reattached, with the various holes for the pins.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today’s video, see how to remove the front bumper on a Fiat Punto Evo and Grande Punto by following these simple steps. First, open and lift the b…
Fiat Punto (1993-1999 / MK 1, 176) How to replace the front bumper on a Fiat Punto Mark I? Follow these steps: using a screwdriver or battery-powered drill, undo the fastening bolts lo…
Fiat Punto (1999-2011 / MK 2, 188) The instructions in this guide will show you the procedure for removing and possibly replacing the front bumper on a Fiat Punto. First, open the vehi…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos