Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on a Fiat Punto Mark I

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Front bumper

How to replace the front bumper on a Fiat Punto Mark I? Follow these steps: using a screwdriver or battery-powered drill, undo the fastening bolts located at the top of the bumper (remove any plastic rivets if present). Undo the screws located at the bottom of the bumper, then remove the screws (plastic rivets) at the sides of the wheel arch liners; once the bumper is free from any screws or bolts, grip it with your hands and pull it away from the bodywork (disconnect any power cables). Carry out the repair or replacement of the front bumper.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the Fiat Grande Punto
How to remove the front bumper of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, see how to remove the front bumper and the two headlights on the Fiat Grande Punto. First, position the vehicle on level ground and…
How to Fit the Front Bumper on a Fiat Grande Punto
How to Fit the Front Bumper on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How do you fit the front bumper on a Fiat Grande Punto? This operation is not too complex if done methodically. Start by placing the bumper perfectly…
How to disassemble the front bumper of the Fiat Grande Punto
How to disassemble the front bumper of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's instructions will guide us through the process of disassembling and replacing the front bumper of the Fiat Grande Punto. First, we open the h…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos