Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Front Bumper on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Front bumper

See other generations:
Video tutorial

How do you fit the front bumper on a Fiat Grande Punto? This operation is not too complex if done methodically. Start by placing the bumper perfectly against the body of the vehicle, then, using a socket wrench, tighten the mounting bolts at the front of the bumper.

Next, begin tightening the bolts around the wheel arch liners. After securing the bolts around the liners, tighten the bolts underneath the car, between the chassis and the bumper.

Finally, check the correct fitting of the bumper in all its mounted parts.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to disassemble the front bumper of the Fiat Grande Punto
How to disassemble the front bumper of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will guide us through the process of disassembling and replacing the front bumper of the Fiat Grande Punto. First, we open the h…
How to Remove the Front Bumper on a Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today’s video, see how to remove the front bumper on a Fiat Punto Evo and Grande Punto by following these simple steps. First, open and lift the b…
How to Fit the Front Bumper on Fiat Grande Punto
How to Fit the Front Bumper on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) .. How to fit the front bumper on a Fiat Grande Punto? Follow these steps; it’s not too complex if done i.. …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos