Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Front Bumper on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Front bumper

How to fit the front bumper on a Fiat Grande Punto? Follow these steps; it’s not too complex if done in order. First, take the bumper and align it perfectly with the vehicle body, then, using a socket wrench, screw in the fastening pins at the front of the bumper. Next, begin to screw in the pins around the wheel arch liners of the car. After tightening the pins around the bumper, tighten the pins at the bottom of the vehicle, between the chassis and the bumper. Check the correct fitting of the bumper in all its parts.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today’s video, see how to remove the front bumper on a Fiat Punto Evo and Grande Punto by following these simple steps. First, open and lift the b…
How to disassemble the front bumper of the Fiat Grande Punto
How to disassemble the front bumper of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's instructions will guide us through the process of disassembling and replacing the front bumper of the Fiat Grande Punto. First, we open the h…
How to Remove the Front Bumper of a Fiat Grande Punto
How to Remove the Front Bumper of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the front bumper of a Fiat Grande Punto? Let's look at the removal process. Lift the bonnet and secure it. Using a metal lever, remove …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos