Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Rear Lamps on Grande Punto 199

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light bulb

To replace the bulbs in the rear lights, it is necessary to remove the lights themselves: open the boot and unscrew the fastening screws of the light located along the boot lid closure line, then pull the light outwards; it may resist slightly as there are two securing pins lodged in rubber bushes; once the light is removed, disconnect the power connector and unscrew the fastening screws of the bulb holder, proceed to replace the bulbs (bayonet fitting), connect only the bulb holder to check its operation, and reassemble everything after cleaning the light housing of any dirt.

Updated on 19 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Rear Light Bulbs on a Fiat Punto 199
How to Replace the Rear Light Bulbs on a Fiat Punto 199
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, you will learn how to replace the bulbs in the rear light of a Fiat Punto 199. Open the boot of your car and using a cross-head screwd…
Replacing the Heating Control Bulbs on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Here's how to replace the bulbs that illuminate the heating controls on a Fiat Punto. Using the appropriate hooks, remove the radio from its slot and…
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial video, learn how to remove and replace the front headlight bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, open the…

How to Set the Clock on the Opel Zafira

Setting the clock to the current Italian time on an Opel Zafira model B is a very simple operation, also made easier by our short instructional video. The first step is to turn on the instrument panel and then press the SETTING button located on the central dashboard. Once inside the menu, use the buttons to navigate to the clock setting. Adjust the hours and minutes and restart the instrument panel. If the clock does not update, it may be necessary to diagnose the radio or the vehicle's control unit.

Watch the video!


by ScegliAuto

More videos