Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Multipla
    4. : How do you replace the gear selector cables on the Fiat Multipla?

Fiat Multipla - Video tutorial

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Gearbox
Operation: How do you replace the gear selector cables on the Fiat Multipla?

In order to replace the gear selector cables on the Fiat Multipla, you need to lift the cover of the gear lever in order to remove it completely. This will allow access to the upper end of the cable, which can then be disconnected from the corresponding selector. At this point, it will be possible to access the end that is located near the gearbox: by loosening this end as well, it will be possible to completely remove the old cable, insert the new one, and secure it. In this way, it will be possible to verify that the gearbox will function better.


Posted on 5 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Multipla 1998-2010 - How much does it cost to change the Fiat Multipla? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos