Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Ford Fusion North America - Clock

Clock Ford Fusion North America (2006-2012 / mk 1)

Ford Fusion North America (2006-2012 / MK 1)
How do you set the clock on the Ford Fusion?
To adjust the clock of the Ford Fusion, you need to turn on the instrument panel by inserting the key into the ignition switch: once this is turned on, you …Read all…
Posted on 28 January 2025 by ScegliAuto
Ford Fusion North America (2006-2012 / MK 1)
How to set the time on the 2011 Ford Fusion
In this our new mini guide we will discover how to manually change the system time of your 2011 Ford Fusion. First of all, go inside the cabin and start the …Read all…
Posted on 1 September 2024 by ScegliAuto
Ford Fusion North America (2006-2012 / MK 1)
How to Manually Change the Time on a Ford Fusion
Changing the time displayed on the radio of your Ford Fusion is very simple. Just follow this procedure to complete the task in seconds. First, get in the …Read all…
Posted on 29 August 2026 by ScegliAuto
Shocks (1) Car stereo (2) Battery (2) Transmission (2) Key (10) Checks and maintenance (8) Headlight (2) Tail light (3) Air filter (2) Cabin air filter (2) Headlight bulb (3) License plate light (2) Handle (1) Engine oil (1) Clock (3) Door trim panel (2) Front bumper (2) Rear bumper (1) Shift knob (2) Fuel pump (2) Power window switch (1) Instrument cluster (1) Wheel (1) Fuse box (19) Seat (1) Parking sensors (1) Side mirror (2) Warning light – error code (5) (3) Tire pressure warning light (2) Service warning light (11) Fuel cap (3) Blower motor (2) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos