Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Gearbox Oil on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Transmission fluid

To work more comfortably, lift your vehicle and place it on suitable axle stands. You can then proceed to remove the plug from the gearbox oil sump. Prepare a suitable container to collect the oil that will drain out. Additionally, you will need to perform a careful bleeding operation using a specific machine, and similarly, this machine can be used to fill the gearbox oil container. For reassembly, retrace the steps described in reverse.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, follow the main steps and instructions to remove the gearbox from a second-generation Ford Kuga. First, open the bonnet and r…
Ford Kuga (2012-2019 / C520, MK 2) To change the engine oil on a Ford Kuga, access the underside of the car to unscrew the bolts securing the undertray. Once the undertray is removed, …
Ford Kuga (2012-2019 / C520, MK 2) In this short video tutorial, see how to remove the gear knob gaiter on a second-generation Ford Kuga in simple steps. First, get inside the vehicle …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos