Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light and Third Brake Light on the Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part:

In this brief guide, you will find instructions to remove and replace the tail light and third brake light on the Ford Escape, as well as the Kuga. First, move to the rear of the vehicle and pry on the back of the tail light, releasing it from the internal clips; disconnect its power connector to remove it, as shown in the video. At this point, replace any burnt-out brake light bulbs with new ones, or replace the entire third brake light; reassemble and connect the brake light, checking its operation.

Posted on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) Follow these steps to remove and replace the third brake light bulb on the Ford Escape, as well as the Kuga. First, go to the back of the vehicle and…
How to Replace the Tail Light and Third Brake Light on the Ford Escape
How to Replace the Tail Light and Third Brake Light on the Ford Escape
Ford Escape (2008-2012 / MK 2) In this guide, we will go over the instructions that will allow us to remove and replace the tail light and its bulbs for the Ford Escape. First, let…
How to disassemble the third brake light on a Ford Escape
How to disassemble the third brake light on a Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see how to disassemble the third brake light of a third generation Ford Escape. So, to remove the third brake light we need to release …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos