Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

See other generations:
Video tutorial

Follow these steps to remove and replace the third brake light bulb on the Ford Escape, as well as the Kuga. First, go to the back of the vehicle and open the trunk; then remove the two clips to detach the entire third brake light assembly, disconnecting the electrical connector to pull it out from the exterior, as shown in the video.

At this point, remove and replace any faulty bulbs with new ones, replacing the entire light assembly if necessary; apply the reverse procedure for reassembly!


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Ford Escape (2013-2019 / MK 3) .. brake light on the Ford Escape, as well as the Kuga. First, move to the rear of the vehicle and pry on the back of the tail light, releasing it from.. …
Ford Escape (2013-2019 / MK 3) The taillights on your vehicle are very important as they ensure greater safety while driving. For this reason, it is essential to replace the bulbs …
Ford Escape (2008-2012 / MK 2) .. the clutch cylinder on a Ford Escape or Ford Kuga, which is the European version of the Escape, the first step is to disconnect the battery terminals.. …

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos