Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cylinder on Ford Escape/Kuga

Model: Ford Escape MK 2 - Years: 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the clutch cylinder on a Ford Escape or Ford Kuga, which is the European version of the Escape, the first step is to disconnect the battery terminals and remove the battery cover to take it out. Also, remove the battery base by unscrewing the mounting screws.

This will give you easy access to the flexible hose and allow you to unscrew the bolts holding the clutch cylinder in place.

Once removed, spray it well with a penetrating fluid to extract the probe. Insert the probe into the new part and reinstall it in place.

Tighten the part securely. Refill the brake fluid and operate the clutch pedal from inside to ensure it works and that the mechanism is functioning properly.

At this point, you can reposition the battery, starting with its support, then the battery itself, its hold-down, reconnect the terminals, and you're done.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Hatch Panel on a Ford Escape
How to Remove the Rear Hatch Panel on a Ford Escape
Ford Escape (2013-2019 / MK 3) Today, you will learn how to remove and replace the rear hatch panel on a Ford Escape. First, open the trunk and start removing the plastic trim piec…
How to Repair the Non-Working Radio of the Ford Escape - Kuga
How to Repair the Non-Working Radio of the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) Let's see in this guide how to repair or reset the radio of the Ford Escape, as well as the Kuga. First, get inside the vehicle and start removing th…
How to Replace the Battery in a Ford Kuga?
How to Replace the Battery in a Ford Kuga?
Ford Escape (2013-2019 / MK 3) To replace the battery in a Ford Kuga, loosen the screws securing the cover panel at the base of the windshield. Once this panel is removed, you can …

Other guides you may be interested in

    Frequently Asked Questions

    • Escape 2008-2012 - What problems does the Ford Escape door actuator have? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos