Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Non-Working Radio of the Ford Escape - Kuga

Model: Ford Escape MK 3 - Years 2013-2019
Part: Car stereo

Video tutorial
Detailed instructions - Let's see in this guide how to repair or reset the radio of the Ford Escape, as well as the Kuga. First, get inside the vehicle and start removing the radio; to do this, remove the shift knob and the climate control panel by unscrewing the screws underneath. At this point, also remove the plastic cover located above the radio display by disconnecting the electrical connectors to take it off; by disconnecting the power, you will reset the multimedia system and radio to factory settings!

Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Ford Escape - Kuga
How to replace the battery of the Ford Escape - Kuga
Ford Escape (2020-2026 / MK 4) .. the battery of the Ford Escape, as well as the Kuga. First, open the hood of the vehicle and start by removing the plastic cover of the battery, then.. …
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) .. light bulb on the Ford Escape, as well as the Kuga. First, go to the back of the vehicle and open the trunk; then remove the two clips to detach the.. …
How to Remove the Rear Hatch Panel on a Ford Escape
How to Remove the Rear Hatch Panel on a Ford Escape
Ford Escape (2013-2019 / MK 3) Today, you will learn how to remove and replace the rear hatch panel on a Ford Escape. First, open the trunk and start removing the plastic trim piec…

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos