Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the center console of a Ford Escape/Kuga

Model: Ford Escape MK 4 - Years 2020-2026
Part: Body

In this video we can see how to remove the central console from the floor of a Ford Escape MK4: Of course, the same procedure is also valid for the European model, that is, the Ford Kuga. We use a plastic spatula to lever in the front part of the console - screwdrivers, no matter how small, can scratch the plastics - which is only snap-fit and comes off easily. The youtuber did not need to remove other pieces of the console, as she had a problem with the cup holder, where one of the holding tabs was stuck and she managed to unlock it from the inside, so she did not even need to remove the electrical connectors, but she put the console back in place and solved the problem.

Posted on 27 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Factory Radio from a Ford Escape 2
How to Remove the Factory Radio from a Ford Escape 2
Ford Escape (2008-2012 / MK 2) In this video tutorial, you will see how to remove the factory radio from the second generation Ford Escape by following these simple and quick steps…
How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see the instructions that will allow us to disassemble and remove the front door panel of the Ford Escape, as well as the Kuga. First, …
How to Repair the Non-Working Radio of the Ford Escape - Kuga
How to Repair the Non-Working Radio of the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) Let's see in this guide how to repair or reset the radio of the Ford Escape, as well as the Kuga. First, get inside the vehicle and start removing th…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos