Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from the Ford Escape

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

Briefly, you will see the steps to remove and replace the factory radio from the Ford Escape, following the instructions below. First, get inside the cabin and remove the plastic cover located at the top by prying it from the sides; then remove the central control panel by disconnecting the electrical connector found on the back, as shown in the video.

At this point, remove the factory radio by disconnecting the wiring; replace it with a new one if necessary and reassemble everything!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to remove the factory radio of the Ford Escape 2
How to remove the factory radio of the Ford Escape 2
Ford Escape (2008-2012 / MK 2) If you want to disassemble the factory radio inside the cabin of your second-generation Ford Escape on your own, just follow the steps described belo…
Replacing the Factory Radio of the Ford Escape
Replacing the Factory Radio of the Ford Escape
Ford Escape (2001-2007 / MK 1) Today's instructions will show you how to remove and replace the factory radio with a new multimedia system in the Ford Escape. First, get inside the…
How to Remove the Factory Radio from a Ford Escape 2
How to Remove the Factory Radio from a Ford Escape 2
Ford Escape (2008-2012 / MK 2) In this video tutorial, you will see how to remove the factory radio from the second generation Ford Escape by following these simple and quick steps…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos