Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the factory radio of the Ford Escape 2

Model: Ford Escape MK 2 - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

If you want to disassemble the factory radio inside the cabin of your second-generation Ford Escape on your own, just follow the steps described below. First of all, get into the car and make sure it is turned off, then proceed to remove the plastic cover above the radio and unscrew the two screws.

Next, remove the small button panel located at the bottom of the central dashboard and disconnect the electrical cable. Finally, pull the radio towards you and disconnect the electrical cables to complete the procedure.


Posted on 23 March 2025 by ScegliAuto


Related tutorials

How to Remove the Factory Radio from the Ford Escape
How to Remove the Factory Radio from the Ford Escape
Ford Escape (2013-2019 / MK 3) Briefly, you will see the steps to remove and replace the factory radio from the Ford Escape, following the instructions below. First, get inside the…
How to Remove the Factory Radio from a Ford Escape 2
How to Remove the Factory Radio from a Ford Escape 2
Ford Escape (2008-2012 / MK 2) In this video tutorial, you will see how to remove the factory radio from the second generation Ford Escape by following these simple and quick steps…
Replacing the Factory Radio of the Ford Escape
Replacing the Factory Radio of the Ford Escape
Ford Escape (2001-2007 / MK 1) Today's instructions will show you how to remove and replace the factory radio with a new multimedia system in the Ford Escape. First, get inside the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos