Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard from a Ford Transit Connect

Model: Ford Connect MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Dashboard

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the entire dashboard of a Ford Transit Connect. First, get inside the vehicle and start removing all the plastic panels found under the dashboard, both on the driver and passenger sides, by unscrewing the screws.

Then, remove the lower dashboard panel, taking out the radio and climate control units (disconnecting the various wiring), as shown in the video. At this point, remove the steering wheel and its airbag, also disassembling the glove compartment to take out the entire dashboard; in this case, the cabin heater radiator is replaced.


Posted on 6 September 2026 by ScegliAuto


Related tutorials

How to remove the front headlight of the Ford Transit Connect
How to remove the front headlight of the Ford Transit Connect
Ford Connect (2013-2023 / MK 2) Today's main instructions will allow us to disassemble and replace the front headlight of the Ford Transit Connect. First, we open the hood of the ve…
How to replace the front headlight bulb of the Ford Transit Connect
How to replace the front headlight bulb of the Ford Transit Connect
Ford Connect (2013-2023 / MK 2) Today's instructions will allow us to disassemble and replace the headlight bulb of the Ford Transit Connect. First, we open the hood of the vehicle …
How to remove the rear seats of the Ford Transit Connect
How to remove the rear seats of the Ford Transit Connect
Ford Connect (2013-2023 / MK 2) In this guide, we will see the instructions that will allow us to disassemble and remove the rear seats of the Ford Transit Connect. First, open the …

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos