Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the purpose and where is the AdBlue control unit located on the Ford Transit MK8?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Control unit

In this video, we first clarify the purpose of the AdBlue control unit on the Ford Transit, which monitors and controls the amount of AdBlue injected into the exhaust system, ensuring that the injection occurs at the right time and in the correct amount to optimize the reduction of nitrogen oxides. It also receives and interprets data from various temperature and quality sensors. This allows for the regulation of AdBlue injection and the diagnosis of any faults in the system. We can see that the control unit is located in the pillar of the left front door, in its lower part, under the plastic shield.

Posted on 27 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Warning Light on Ford Transit
How to Reset the AdBlue Warning Light on Ford Transit
Ford Transit (2006-2014 / MK 7) If the AdBlue warning light on your Ford Transit does not turn off despite regular topping up of the additive, the issue may not be with the vehicle.…
How to Top Up AdBlue Fluid on a Ford Transit Van
How to Top Up AdBlue Fluid on a Ford Transit Van
Ford Transit (2014-2024 / MK 8) In this video tutorial, you will learn how to top up the AdBlue fluid to reduce CO2 emissions on a Ford Transit Van. When the AdBlue warning light ap…
How to Reset the AdBlue Warning Light on the Ford Transit
Ford Transit (2014-2024 / MK 8) In today's video, see how to address the issue related to the AdBlue system in the Ford Transit. This intervention is required if the system does not…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos