Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel and Airbag from a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Steering wheel

See other generations:
Video tutorial

This guide provides instructions for removing and replacing the steering wheel and its airbag on a Ford Fiesta. First, get inside the vehicle and start unscrewing the two rear screws of the steering wheel, as well as those of the plastic cover; then push on the rear holes of the steering wheel to remove the airbag, disconnecting its electrical connector.

At this point, unscrew the central screw of the steering wheel to remove it; carry out the repair or replacement of the steering wheel, installing it in the correct position and finally reassembling the airbag.


Posted on 3 November 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag on a Ford Fiesta
How to Remove the Airbag on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Remove the covering plastics around the steering wheel (rear). Once the plastics are removed, unlock the securing clips of the airbag. Detach the air…
How to Remove the Steering Wheel Airbag on a Ford Fiesta
How to Remove the Steering Wheel Airbag on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) How to remove the steering wheel airbag on a Ford Fiesta? Before removing the steering wheel, disconnect the battery terminals located in the engine …
How to Remove the Airbag and Steering Wheel of a Ford Fiesta
How to Remove the Airbag and Steering Wheel of a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How do you remove the airbag and steering wheel of a Ford Fiesta? Before removing the steering wheel, disconnect the battery terminals located in the…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos