Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Speaker

How to remove the steering wheel airbag on a Ford Fiesta? Before removing the steering wheel, disconnect the battery terminals located in the engine compartment. Follow these steps to remove the airbag: remove the inspection caps at the back of the steering wheel (if present), then use a screwdriver to release the screws securing the steering wheel cover (where the airbag is located). Once the airbag is released (driver's side), disconnect the power connectors and remove it from the steering wheel. For refitting the airbag: connect the power connectors, then press it onto the steering wheel while simultaneously tightening the rear bolts.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Wheel from the Ford Fiesta
Removing the Steering Wheel from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide will show you how to remove and replace the steering wheel on the Ford Fiesta. First, get into the vehicle and start by removing the steer…
Removing the Steering Wheel of a Ford Fiesta
Removing the Steering Wheel of a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this tutorial, you will learn how to remove the steering wheel from a second-generation Ford Fiesta. First, get inside the car and turn the steeri…
Removing the Steering Wheel on Ford Fiesta
Removing the Steering Wheel on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing a damaged steering wheel on a Ford Fiesta, here's how to do it. Disconnect the battery terminals located in the front engine compartment. R…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos