Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Ford Transit Connect

Model: Ford Connect MK 2 - Years 2013-2023
Part: Headlight bulb

Today's instructions will allow us to disassemble and replace the headlight bulb of the Ford Transit Connect. First, we open the hood of the vehicle and start by removing the plastic protective cap of the bulbs; then we remove the bulb holder with the low beam bulb, disconnecting the lamp from the connector, as shown in the video. At this point, we install the new headlight bulb, of the correct type and with the same fitting; we check the operation of the light and reassemble the bulb holder on the headlight, finally fixing the plastic cover!

Posted on 23 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front headlight of the Ford Transit Connect
How to remove the front headlight of the Ford Transit Connect
Ford Connect (2013-2023 / MK 2) Today's main instructions will allow us to disassemble and replace the front headlight of the Ford Transit Connect. First, we open the hood of the ve…
How to Remove the Dashboard from a Ford Transit Connect
How to Remove the Dashboard from a Ford Transit Connect
Ford Connect (2002-2013 / MK 1) The instructions in this guide will show you how to remove and replace the entire dashboard of a Ford Transit Connect. First, get inside the vehicle …
How to Replace the Key Fob Battery in a Ford Transit Connect
How to Replace the Key Fob Battery in a Ford Transit Connect
Ford Connect (2002-2013 / MK 1) The procedure to replace the battery in a Ford Transit Connect key fob is quite simple. Before you start, ensure you have the necessary materials: a …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos