Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulb on a 2010 Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

See other generations:
Video tutorial

Let's see how to change the front headlight bulb on a 2010 Ford Fiesta (MK6). Open the bonnet and unscrew the two T30 Torx screws above the headlight, then disconnect the electrical connector, press the lever to release the bulb holder, and remove the rubber cover.

To remove the bulb, turn it counterclockwise to extract it from the holder.

Be careful not to touch the glass of the new bulb with your fingers: the oil from your skin could damage the bulb, drastically reducing its lifespan. Now you can reassemble everything in reverse order.


Posted on 27 September 2026 by ScegliAuto


Related tutorials

Replacing the Headlamp Bulb on a Ford Fiesta
Replacing the Headlamp Bulb on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Follow these steps to replace the dipped beam headlamp bulb on your Ford Fiesta. Open the bonnet and position yourself in front of the headlamp conta…
How to Change the Dipped Headlight on a Ford Fiesta MK6
How to Change the Dipped Headlight on a Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this short video tutorial, learn how to replace a bulb on a Ford Fiesta MK6. Start by opening the bonnet and remove the two screws and the clip th…
How to Change Bulbs on Ford Fiesta
How to Change Bulbs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to change the bulbs of the Ford Fiesta? Start by removing the bulbs and the front headlamp. Lift the front bonnet of the car, unscrew the securin…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos